Why lithium?
High quality 12 V Lithium Iron Phosphate (LiFePO4) cells are the basis for WhisperPower’s new lithium storage systems. The new lithium Power Plus Battery Racks are a sustainable and highly energy dense solution to store electrical energy for use “on demand”. Due to the specific characteristics of the Whis- perPower LFP ferro lithium batteries, the battery pack(s) can be charged and discharged at high amperes.
The added value of WhisperPower
All Lithium battery solutions can be supplied just “as a bat- tery”. However, we offer our customers a total solution that eliminates the risk of the user’s battery not being charged, discharged or monitored properly. The system approach goes beyond simply supplying a WhisperPower battery charger or combination inverter/charger. If required, we can supply a complete diesel fuel based fast charge system in combination with the Lithium Power Plus rack with integrated BMS, DC bus bar (s) distribution including fuses and an advanced monitor- ing system that monitors the behavior of the cells inside the battery down to the cell level: WhisperCare.
Sustainable and cleaner for the user
Further electrification to replace or supplement fossil power solutions reduces the carbon footprint on a substantial basis. In addition, large cost savings can be achieved because the fossil power system can be used much more efficiently.
A higher upfront investment is recouped within a short time.
Lithium Power Plus modular battery rack system
Added Value Services from WhisperPower
| TECHNICAL SPECIFICATIONS | |
| Chemistry | LiFePO4 |
| Module configuration (12 V module) | 2s6p |
| Number of modules | 12 |
| Nominal voltage | 24 V |
| Nominal energy | 16.6 kWh |
| Open circuit voltage | 26,4 V |
| Nominal capacity | 630 Ah |
| Cycle Life DOD 80% | >3500 cycles (at 1C charge / discharge, 80% DoD |
| Self discharge | <3% per month |
| Weight modules (excel. aluminum cabinet), kg (lb) | 120 (264.6) |
| CHARGE PARAMETERS | |
| Charge method | CCCV |
| Maximum charge voltage | 29,8 V |
| Recommended charge voltage | 28,6 V |
| Recommended charge current | 315 A (0.5 C) |
| Continuous charge current | 630 A (1.0 C) |
| DISCHARGE PARAMETERS | |
| Discharge cut-off voltage | 21,6V |
| Recommended discharge current | 315 A (0.5C) |
| Maximum discharge current | 630 A (1.0C) |
| Discharge pulse current | 1260 A (2C, 10 sec, SOC > 60%) |
| Fuse protection | 3* 400 A T-class |
| MECHANICAL | |
| Power connections | 2*M10 stud, max 20NM |
| Cable connections | Option: Top or Bottom |
| IP-Protection class | IP 66 cell IP20 connection |
| Cooling | Natural air convection |
| Module material | PC-ABS, UL94-V0 |
| Battery case material | Aluminium Powdercoat |
| Dimensions (l x w x h), mm | 1260 x 280 x 465 (540) |
| Dimensions (l x w x h), inches | 49,6 x 11 x 18,3 (21,3”) |
| Total weight module plus cabinet | ±150-160 kg / 331-353 lbs |
| CONFIGURATION | |
| Series configuration | On request |
| Parallel configuration | On request |
| Redundant mode | Yes, using double BIM |
| ENVIRONMENTAL | |
| Operating temperature charge | 0°C to 55 °C / 32°F to 131°F |
| Operating temperature discharge | -20°C to 55°C / -4°F to 131°F |
| Storage temperature | -20°C to 55°C / -4°F to 131°F |
| Humidity (Non-condensing) | <95% |
| SAFETY | |
| Battery Management System (BMS) | External WP-BIM module |
| Balancing | Passive method |
| Communication CAN-Bus | whisperconnect/NMEA2000 |
| EMC: Emission | EN-IEC 61000-6-3:2007/A1:2011/C11:2012 |
| EMC: Immunity | EN-IEC 61000-6-1:2007 |
| Low voltage directive | EN 60335-1:2012/AC:2014 |
| Certifications | CE, FCC, UN 38.3, UL 1642 (Cells), UN ECE R10.06, EN/IEC 62620(ESTRIN) |
| Shipping classification | UN3480 |
